Zones
From Leaf Essentials
More actions
Creating a zone
Open customizer, go to the add page, and add a zone (should be near the bottom of the add submenu)
Type a name, set a starting and ending position, and dimension if needed. Priority can be left alone unless you need a zone inside of a zone.
Testing zone boundaries
In leaf, there is an item called "zone borders". Grab one and use it, and you can visualize zone boundaries. Zone boundaries will get brighter if the zone is currently the active one
About priority
If you have zones inside of zones, leaf will take the one with the largest priority number.
Teleporting to zones
In the zones edit menu, you have 3 buttons for teleporting:
- Pos1
- Pos2
- Center
Pos1 is the first corner set in the zone settings, while Pos2 is the second. Center is the calculated center between those 2 corners.